Fixed Tubular Columns - (FMT)
The highly popular FMT range offers an extremely costeffective, unobtrusive and practical solution for many camera mounting scenarios. This versatile tubular CCTV column is supplied with a lockable access door and backboard for terminations. Suitable for installation in all areas, this range remains the specifiers preferred choice for the cost-conscious.
Design Specification
- A cost effective solution for achieving desired camera height.
- Off the shelf heights up to 8 metres*.
- Excellent stability characteristics for minimum camera movement.
- Suitable for public access areas.
- A desirable column where aesthetics are of importance.
- Flange mounted type FM root.
- Pocket type roots available for restricted foundation locations.
- Totally concealed cable management facility.
- Hot dipped galvanised finish for maximum weather protection and low maintenance requirements.
- Custom and bespoke versions tailored to the customer's requirements.
- Clamp on camera brackets available.
General Specification
- Standard pan and tilt fixing of 101.6 PCD.
- Inspection / jointing aperture with backboards as standard feature.
- Compatible with WEC adaptors, accessories and anti climbs.
- Equipment loading of up to 25 kg.
- Variety of standard heights up to 12 metres*.
- Camera mount bracket adaptors available to suit.
In stock
Only %1 left
£0.00
+ VAT
Related Products
Check items to add to the cart or
Installation Method
- From the map, select location of installation
- Excavate as per recommended area and depth
- Assemble root base as shown in fig.
- Insert root base into the hole ensuring that it is level and that the four studs protrude 60-70mm above the concrete foundation
- Fit the cable duct if routing via the interior of the column. A plastic pipe of approximately 100mm outside diameter is recommended for this. Ensure this protrudes through the template by 50mm (min)
- Pour concrete ensuring that it is a mix of C35 to table 6 BS 8110 and then tamp down well
- Fit the setting template over the four protruding studs, double-checking that they are level and that clear access can be gained to the cable duct if it is being used.
- Leave the concrete to cure for a minimum of 72 hours prior to attempting to erect the column
- When fitting the column, ensure that the concrete base is in complete contact with the underside of column and grout accordingly if required. Torque the nuts to 230-270 Nm (175-200 ft. lb.)
- When the column has been fitted, protect studs with a suitable protective coating. Denzo tape or similar is recommended for this.
SKU
Fixed Tubular Columns - (FMT)